Christie 103-013100-01 Manuel d'utilisateur Page 3

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 4
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 2
LX1500 Lamp/Filter Replacement Instruction Sheet 3 of 4
020-000013-01 Rev. 1 (09/07)
1. Press the MENU button to display the
On-Screen Menu. Use the buttons to
move the red frame pointer to the Setting
Menu icon
2. Use the buttons to move the red
frame pointer to Lamp counter and then
press the SELECT button. A dialog box
appears. Select a lamp and the “Lamp
replacement counter Reset?” appears.
Select [Yes] to continue.
3. Another confirmation dialog box appears
and select [Yes] to reset the Lamp
counter.
NOTE: Do not reset the Lamp counter
without replacing the lamp and only after
replacing the lamp.
FILTER CARE/REPLACEMENT PROCEDURE
Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter
become clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal
heat buildup and adversely affect the life of the projector. If a Filter Warning icon appears on the
screen, clean the filter immediately.
1. Turn off the projector, wait for fans to tunr off and unplug
the AC power cord from the AC outlet.
2. Pull out the air filter from the projector.
3. Clean the filter with a brush to remove dust and particles.
If filter cannot be adquately cleaned, simply replace the
filter with a new one (P/N 003-001733-01).
4. Re-install the air filter in a projector.
NOTICE: Do not operate the projector with the Air Filter(s)
removed. Dust may accumulate on the LCD Panels and
Projection Mirrors degrading the picture quality. Do not put
anything into the air intake vents. Doing so may result in a
malfunction of the projector. Failure to properly clean the
projector's air filters (in accordance with the instructions in
your Projector's Operating Manual, or more frequently in any
environment which is somewhat dusty or smoky) could result in
overheating and will void the warranty on the projector.
NOTES: 1) If the filter is heavily clogged and unable to clean, replace it with a new one. Please
consult your dealer for details. 2) Do not wash the filter with water or any other liquid matter.
Figure 2 Reset Lamp Counter
Figure 3 Replace Filter
Vue de la page 2
1 2 3 4

Commentaires sur ces manuels

Pas de commentaire