Christie DW series Informations techniques

Christie DS+/DW/HD, Mirage S+/HD, DLV and Matrix S+/HD Series Parts and Module Replacement Booklet 020-100012-01 Rev. 1 (04/07) 1 Ordering Parts.

Christie/Mirage/DLV/Matrix Parts and Module Replacement 10 020-100012-01 Rev. 1 (04/07) Figure 1. Removing Projector Covers AC Relay Module (10

Parts and Module Replacement Christie/Mirage/DLV/Matrix 020-100012-01 Rev. 1 (04/07) 11 Air Filters (5 minutes for both) Two air filters are use

Christie/Mirage/DLV/Matrix Parts and Module Replacement 12 020-100012-01 Rev. 1 (04/07) 3. Notice the position of the sensor. It must be repositi

Parts and Module Replacement Christie/Mirage/DLV/Matrix 020-100012-01 Rev. 1 (04/07) 13 Figure 5. Airflow Sensor Position for 1200W Models Bui

Christie/Mirage/DLV/Matrix Parts and Module Replacement 14 020-100012-01 Rev. 1 (04/07) NOTE: The screw used to secure the ground lead is longer t

Parts and Module Replacement Christie/Mirage/DLV/Matrix 020-100012-01 Rev. 1 (04/07) 15 7. Remove the two (2) screws located near the large conn

Christie/Mirage/DLV/Matrix Parts and Module Replacement 16 020-100012-01 Rev. 1 (04/07) Figure 11. Removing the Cold Mirror When replacing the co

Parts and Module Replacement Christie/Mirage/DLV/Matrix 020-100012-01 Rev. 1 (04/07) 17 Figure 12. Accessing the Contrast Aperture Ass

Christie/Mirage/DLV/Matrix Parts and Module Replacement 18 020-100012-01 Rev. 1 (04/07) Fans, DMD (1000W and 1200W models only ) NOTE: 500W pr

Parts and Module Replacement Christie/Mirage/DLV/Matrix 020-100012-01 Rev. 1 (04/07) 19 3. Remove the black exhaust duct located just in front o

Christie/Mirage/DLV/Matrix Parts and Module Replacement 2 020-100012-01 Rev. 1 (04/07) Use the instructions provided in this booklet to replace an

Christie/Mirage/DLV/Matrix Parts and Module Replacement 20 020-100012-01 Rev. 1 (04/07) Fan, Low Voltage Power Supply (Fan 2) (14 minutes) The L

Parts and Module Replacement Christie/Mirage/DLV/Matrix 020-100012-01 Rev. 1 (04/07) 21 Fan, Lamp Blower (Fan 3) (49 minutes) The lamp blower is

Christie/Mirage/DLV/Matrix Parts and Module Replacement 22 020-100012-01 Rev. 1 (04/07) b) Remove the three (3) screws attaching the fan to the b

Parts and Module Replacement Christie/Mirage/DLV/Matrix 020-100012-01 Rev. 1 (04/07) 23 1. Remove the top cover. See Top Cover for instructions.

Christie/Mirage/DLV/Matrix Parts and Module Replacement 24 020-100012-01 Rev. 1 (04/07) 7. Disconnect the AC cable connection from the ballast.

Parts and Module Replacement Christie/Mirage/DLV/Matrix 020-100012-01 Rev. 1 (04/07) 25 Fans, TIPM (Fan 7 & Fan 8) (14 minutes) The TIPM fa

Christie/Mirage/DLV/Matrix Parts and Module Replacement 26 020-100012-01 Rev. 1 (04/07) Figure 29. Removing C-Clip from Projecto r Feet Flex/L

Parts and Module Replacement Christie/Mirage/DLV/Matrix 020-100012-01 Rev. 1 (04/07) 27 Figure 31. Flex Cable Orientation To replace any of the

Christie/Mirage/DLV/Matrix Parts and Module Replacement 28 020-100012-01 Rev. 1 (04/07) 1. Remove the top cover. See Top Cover for instructions.

Parts and Module Replacement Christie/Mirage/DLV/Matrix 020-100012-01 Rev. 1 (04/07) 29 Figure 34. Remove Rear Air Filter 3. Remove the lamp. R

Parts and Module Replacement Christie/Mirage/DLV/Matrix 020-100012-01 Rev. 1 (04/07) 3 When ordering replacement parts, please provide the follo

Christie/Mirage/DLV/Matrix Parts and Module Replacement 30 020-100012-01 Rev. 1 (04/07) Figure 37. Remove Exhaust Duct 7. Remove the green DMD f

Parts and Module Replacement Christie/Mirage/DLV/Matrix 020-100012-01 Rev. 1 (04/07) 31 11. Wearing clean gloves, remove the integrator assembly

Christie/Mirage/DLV/Matrix Parts and Module Replacement 32 020-100012-01 Rev. 1 (04/07) Figure 41. Adjust Integrator Rod (A) Figure 42. Adjust

Parts and Module Replacement Christie/Mirage/DLV/Matrix 020-100012-01 Rev. 1 (04/07) 33 6. Once you are satisfied with the output, power the pr

Christie/Mirage/DLV/Matrix Parts and Module Replacement 34 020-100012-01 Rev. 1 (04/07) Figure 45. Remove the Rear IR Sensor Lamp Use only the

Parts and Module Replacement Christie/Mirage/DLV/Matrix 020-100012-01 Rev. 1 (04/07) 35 Figure 47. Pull and Turn Lock Lever 4. Grasp the lamp b

Christie/Mirage/DLV/Matrix Parts and Module Replacement 36 020-100012-01 Rev. 1 (04/07) 8. The next time the projector is powered up, enter the s

Parts and Module Replacement Christie/Mirage/DLV/Matrix 020-100012-01 Rev. 1 (04/07) 37 Figure 50. Disconnect Ballast Cable Connection 16. Remov

Christie/Mirage/DLV/Matrix Parts and Module Replacement 38 020-100012-01 Rev. 1 (04/07) Lamp Interlock Switch (12 minutes) The lamp interlock is

Parts and Module Replacement Christie/Mirage/DLV/Matrix 020-100012-01 Rev. 1 (04/07) 39 4. Disconnect all the cable connections from the front ed

Christie/Mirage/DLV/Matrix Parts and Module Replacement 4 020-100012-01 Rev. 1 (04/07) Refer to Table 1 and the Exploded View provided for a lis

Christie/Mirage/DLV/Matrix Parts and Module Replacement 40 020-100012-01 Rev. 1 (04/07) 7. Carefully, remove the lens mount from the front of the

Parts and Module Replacement Christie/Mirage/DLV/Matrix 020-100012-01 Rev. 1 (04/07) 41 Figure 55. Remove Optical Assembly 9. Separate the ligh

Christie/Mirage/DLV/Matrix Parts and Module Replacement 42 020-100012-01 Rev. 1 (04/07) LiteLOC Assembly (9 minutes) The LiteLOC assembly is l

Parts and Module Replacement Christie/Mirage/DLV/Matrix 020-100012-01 Rev. 1 (04/07) 43 5. Remove the two (2) screws securing the LVPS assembly

Christie/Mirage/DLV/Matrix Parts and Module Replacement 44 020-100012-01 Rev. 1 (04/07) When replacing, slide the LVPS under the plate at the back

Parts and Module Replacement Christie/Mirage/DLV/Matrix 020-100012-01 Rev. 1 (04/07) 45 Figure 64. AC Line Filter Replace a new line filter usin

Christie/Mirage/DLV/Matrix Parts and Module Replacement 46 020-100012-01 Rev. 1 (04/07) Figure 65. Projection Lens Components Figure 66. Remove

Parts and Module Replacement Christie/Mirage/DLV/Matrix 020-100012-01 Rev. 1 (04/07) 47 Figure 67. Remove Shutter Assembly 5. Remove the two (2

Christie/Mirage/DLV/Matrix Parts and Module Replacement 48 020-100012-01 Rev. 1 (04/07) Figure 69. Projector Input Panel Three Chip Panel Driver

Parts and Module Replacement Christie/Mirage/DLV/Matrix 020-100012-01 Rev. 1 (04/07) 49 NOTE: The appearance and cable connections of your projec

Parts and Module Replacement Christie/Mirage/DLV/Matrix 020-100012-01 Rev. 1 (04/07) 5 Exploded View Label Part Name /Description Service Kit No

Parts and Module Replacement Christie/Mirage/DLV/Matrix 020-100012-01 Rev. 1 (04/07) 51 Interconnection Drawing

Christie/Mirage/DLV/Matrix Parts and Module Replacement 52 020-100012-01 Rev. 1 (04/07) Interconnection Drawing

Christie/Mirage/DLV/Matrix Parts and Module Replacement 6 020-100012-01 Rev. 1 (04/07) Part/Description Service Kit Non-RoHS Part Number Service

Parts and Module Replacement Christie/Mirage/DLV/Matrix 020-100012-01 Rev. 1 (04/07) 7

Christie/Mirage/DLV/Matrix Parts and Module Replacement 8 020-100012-01 Rev. 1 (04/07) WARNING Always power down the projector using approp

Parts and Module Replacement Christie/Mirage/DLV/Matrix 020-100012-01 Rev. 1 (04/07) 9 This booklet provides all procedures necessary to replace