Christie DWU675-E Manuel d'utilisateur télécharger pdf (Page 40)

E Series 675/775 Serial Commands Technical Reference Information 36 of 53

020-000576-01 Rev. 1 (10-2012)

(LPI) LAMP INTENSITY READ/WRITE: R/W

SUBCODE

DESCRIPTION OF USE

Set the value for the Constant Intensity to maintain Constant brightness.

A light sensor is used to monitor the light level and will apply more power as the lamp brightness

decays naturally over time until it reaches maximum power. The light sensor needs to be calibrated

when you replace a lamp or "Reset Lamp Hours". Valid range is 0 to 10 and default value is 7.

EXAMPLES:

(LPI 5)

(LOP) CURRENT LAMP READ/WRITE: R/W

SUBCODE

Allows modifiers “n” and “p” for selecting “next” and “previous” values

DESCRIPTION OF USE

Controls which lamp(s) are in use.

EXAMPLES:

(LOP1) : Only Lamp 1 lit.

(LOP2) : Only Lamp 2 lit.

(LOP0) : Both Lamps lit.

(WSP) ECO / WHISPER MODE READ/WRITE: R/W

SUBCODE

Allows modifiers “n” and “p” for selecting “next” and “previous” values

DESCRIPTION OF USE

Switch to ‘ECO Mode’. When ECO Mode is enabled, the projector will switch to single lamp mode,

will adjust to the lowest fan speed and will switch the lamp power to the minimum setting in order to

be in the quietest mode possible.

EXAMPLES:

(WSP0): Off.

(WSP1): Lamp1.

(WSP2): Lamp2.

(WSP3): Auto.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 56 57

Pas de commentaire

Christie DWU675-E Manuel d'utilisateur Page 40