Christie DWU675-E Manuel d'utilisateur télécharger pdf (Page 17)

E Series 675/775 Serial Commands Technical Reference Information 13 of 53

020-000576-01 Rev. 1 (10-2012)

(ROT) ROTATION GEOMETRY CORRECTION

READ/WRITE: WRITE ONLY

SUBCODE

DESCRIPTION OF USE

Allow an image to be rotated - most commonly to level the image. While the image is rotated, the

software can crop any content that begins to fall off the panel. The function will not automatically

scale the image down to prevent cropping. If scaling is required, the digital zoom function can be

used, independently of the rotation function.

This function is only available when the optional Dual Processor Warp Module is installed.

Valid range is 0-20. Default value is 10. The maximum effective adjustment limits are as follows:

EXAMPLES:

(AIM1)

(AIM) AUTO IMAGE READ/WRITE: WRITE ONLY

SUBCODE

DESCRIPTION OF USE

Forces the projector to reacquire and lock to the input signal. This is useful when signal quality is

marginal. “Normal mode” can support all of the 4:3 input sources. “Wide mode” can support all of the

16:9 input source and most of the 4:3 input source. For 4:3 input sources not recognized by “Wide

mode” (example 1400 x 1050), perform Auto Image using “normal mode”.

EXAMPLES:

(AIM1)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 56 57

Pas de commentaire

Christie DWU675-E Manuel d'utilisateur Page 17