Christie CP2000-M Guide d'installation télécharger pdf (Page 21)

Section 2: Basic Operation

CP2000-M/MR Setup Guide 2-13

020-100205-03 Rev. 1 (05/09)

range for the installed lens. Once lens calibration is completed the results for the current lens are

saved to the system.

• Auto ILS: Auto ILS is a per channel setting that is stored with the channel so when a channel is

made active the lens will automatically move to the saved or default position for that channel. If

Auto ILS is inactive, a manual adjustment of the lens is required and any channel change will not

adjust the lens.

• Reset on Startup: This menu feature works in conjunction with the ILS. Both the ILS and Reset on

Startup options must be turned ON for the Lens Reset feature to work. When Reset on Startup is

enabled all 4 lens axes are reset when the projector is powered ON from STANDBY mode. The lens

reverts to its original position after the lens has been reset.

• Auxiliary Lens: Option indicates whether or not the auxiliary lens is used.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 73 74

Pas de commentaire

Christie CP2000-M Guide d'installation Page 21